|
 |
|
Notes: Opti-Pac 1900 IL/IDE is manufactured from
rigid PVC sheet stock that meets CTI Specification STD-136 (88), with UV inhibitor added.
Standard mil thicknesses are 10 mil and 15 mil after forming. Other mils are available
upon request. Standard module dimensions are 12" or 24" deep x 12" wide.
Module lengths range from 4'0" to 10'0". Standard modules consist of 16
sheets. A 17th sheet can be added to insure nesting of the modules during installation.
|
Modules
are fabricated in 12" or 24" depths, 12" to 24" widths, and in lengths
up to 10'-0" in 2' increments. Custom dimension modules are available
upon request.
Standard sheet mil
thicknesses are 10 mil and 15 mil after forming. PVC sheets have the following
properties:
| Physical Property |
ASTM Test |
Units |
Value |
| Density |
D772 |
g/cm3 |
1.39 - 1.45 |
| Tensile Strength (yield |
D882 |
lb/in2 |
6,000 min |
| Flexural Strength |
D790 |
lb/in2 |
>11,000 |
| Flexural Modulus |
D790 |
lb/in2 |
>525,000 |
| Stiffness in Flexure |
D747 |
lb/in2 |
525,000 min |
| Gardner Impact Strength |
D4226 |
in lb/mil |
1.0 min |
| Tensile Impact Strength |
D1822 |
ft lb/in2 |
255 min |
| Heat Deflection |
D648 |
Deg F. |
255 min |
| Flammability |
D635 |
|
Self extinguishing
Less than 5 seconds |
| Flame Spread Rate |
E 84 |
|
Less than 20 |
|
